A Spoonful of Hugo: How much Hugo do I need to know?

Photo by Joanna Kosinska on Unsplash

Greetings and happy holidays! As many folks are looking forward to down time over the holidays, my inbox naturally starts filling in with questions like “What is the difference between blogdown and X?”, “How hard is Hugo to learn?”, and “Which Hugo theme do you recommend?” These are all great questions. But the best one in my mind that one needs to ask is:

“How much Hugo do I need to know right now?”

And the answer, of course, depends on where you are starting from and where you’d like to end up.

In this post, I’ll share when and why I think a typical R blogdown user needs to learn Hugo. I’ll tell you a secret: I enjoyed learning Hugo. But I learned blogdown first, and frankly was blissfully unaware of the complexity of the underlying Hugo templating language. I was a happy blogdown user for about 1.5 years before taking the plunge to actually learn Hugo. Why did I do it? I needed to build a website for the RStudio Education team, and for sustainability and maintenance, I had been burned by external themes in various ways too many times for my personal site.

We decided as a team that we didn’t want our site to depend on a third-party Hugo theme. What can go wrong with using third-party Hugo themes? For one, if you choose a not very active or well-maintained theme, then you could get stuck with a not well-maintained theme. Or worse, your theme could get orphaned, with no maintainer. But, on the flip-side, if you pick a very active and well-maintained theme, you might find yourself dealing with theme and Hugo updates more than you would like (cough cough like the Wowchemy/Academic theme).

The tidyverse.org site was built with a lot of custom HTML, CSS, and some Hugo layout files. I decided to turn that site into a real Hugo theme, and use that theme across teams. You may not have noticed any change when we switched to the new theme- at least I hope you didn’t! That site and the RStudio Education site both use the same Hugo theme I built.

Now that I’ve gone from casual Hugo user to theme developer, I have some advice. Generally, as a blanket rule, here is what you should and should not touch:

But what can you do with blogdown before learning Hugo? When and how do you know when you need to get to know Hugo better? Hopefully this post will help answer these questions.

Inspired by Jenny Bryan’s talk on lazy evaluation, I’m framing these learning decision points based on what you want to get done.

You want to: make a website with blogdown

You need to know this much Hugo: Hugo takes a collection of files (called content) and generates a collection of static HTML files as a single, cohesive, navigable website (plopped in your public/ folder). How it looks depends on which Hugo theme you pick r emo::ji("paint")

You’ll need to:

But you probably want to do more…

You want to: customize your site

You need to know this much more Hugo: Hugo themes typically use one or more metadata files (TOML or YAML) to set up global variables to use to build your site. This is usually the way to add a site url, a site name, link social accounts for personal websites, basically take any of the default content you see and customize it for you.

The main files to edit are:

To get familiar with TOML, I recommend:

But, since the time we published the blogdown book, Hugo introduced configuration directories, which allowed us to no longer have one giant config.toml file, and instead have multiple configuration files, like this:

├── config.toml            <- Hugo-defined variables
├── config
│   ├── _default
│   │   ├── menus.toml     <- menus :)
│   │   └── params.toml    <- theme-specific variables

Here is how you can think of these:

  • config.toml/config.yaml: your most direct communication with Hugo. These are standard Hugo-defined variables that have defaults you can override in this file. You can view all of them here. These are universal across themes.

  • menus.toml: your way of editing the content in a side or upper navigation menu bar; see example here. These work the same way across themes (with the exception of drop-down menus, which work in some themes but not others).

  • params.toml: your theme’s way of providing an API for Hugo. These are variables that your theme creator has made for you! This is a gift, but not the kind you can re-gift easily. This file will not work with any other theme.

If your theme uses only a single config.toml file, you can infer these subsections as you scroll down:

# before the first use of [[]]
# are all the Hugo variables

# Menu Configuration- same as menus.toml
[[menu.main]]

# Theme Configuration- same as params.toml
[params]

You still don’t need to learn Hugo…yet.

You want to: add content to your site

You need to know this much more Hugo: Remember how the input to Hugo is a “collection of files”? The input is more specifically a collection of markdown files. Hugo themes use content written in markdown files (for blogdown users, R Markdown files work too) to generate your site’s content; with one very important rule — the same structure that works to organize your site content is used to organize the rendered site.

But, what does that mean?

The main files to edit are:

First, the structure and the names inside your content/ folder is meaningful. The names of each folder determine what Hugo layout will be applied. Why do you care? If you change the content name, things may not look good because Hugo can’t find the right layout. Think of your site like going to a party at a friend’s house- you can bring food, wine, maybe a board game- your host knows what to do with these things. But if you bring a monkey, for example, your host has no idea what to do with it!

monkey at party

Yuo can override this by adding a layout key to your file’s YAML, as described here. The relevant bit is here:

layout: the layout Hugo should select from the lookup order when rendering the content. If a type is not specified in the front matter, Hugo will look for the layout of the same name in the layout directory that corresponds with a content’s section.”

The subfolders also tell you where you can find your content on your site.

.
├── content/
│   ├── authors/            # => https://example.com/authors/
│   ├── privacy/index.md    # => https://example.com/privacy/
│   └── home/               # => https://example.com/

You should take a bit of time to get the “cook’s tour” of your site. Try looking at each file and guessing the URL you’ll use to see it in the rendered site. Do this now and it will become like second nature.

You’ll no doubt run into one question: what is the difference between index.md and _index.md files? index.md are simple pages; the single file goes into the site and a single file comes back out when you view the site. This is called a leaf bundle in Hugo.

.
├── content/
│   ├── privacy/index.md       # => a leaf bundle
│   └── blog/                  # => a branch bundle
│       ├── _index.md          # => AHA!
│       ├── gorillas/index.md  # => a leaf bundle
│       ├── baboons/index.md   # => another leaf bundle
│       └── monkeys/index.md   # => yet another leaf bundle

An _index.md file, on the other hand, signals that this folder has a listing page activated. This is called a branch bundle in Hugo. Listing pages are a bit magical, so make sure you understand them now. Typically, if you edit the _index.md file at all, you edit the YAML of this file- often the page content below the YAML isn’t revealed by the theme (this is a bit hand-wavy and I’m sorry for that).

So if you have content/blog/gorillas/index.md, you get not one but two pages. Let’s pretend my baseurl is alison.rbind.io. You get a list page that will render at alison.rbind.io/blog/, and indexes all the index.md files inside that content folder. You also get a single page that will render at alison.rbind.io/blog/gorillas/, which shows you the full content of the index.md file.

You want to: customize colors and fonts on your site

You need to know this much more Hugo: It depends on your theme :) You may need to learn CSS, and you may need to learn to read Hugo now.

Many Hugo themes enable users to edit aesthetic elements like colors and fonts. So, depending on your Hugo theme, you may not need to know CSS. Other themes provide a way to “plug in” a custom CSS file to change those things and more (like spacing, font sizing, etc.). Guess where that is? Usually it is in your config.toml file in the [params] section (if no configuration directory) or the params.toml file. The theme author should leave you a breadcrumb to figure out what you should name and where you should place your custom CSS file.

For example, the Hugo academic theme provides a few ways in. In the params.toml file, you can use an included site color theme or make your own, and customize your fonts. You can also provide your own custom CSS file by including it here: https://github.com/gcushen/hugo-academic/blob/master/assets/scss/custom.scss

If your theme doesn’t provide this level of support, then you may need to learn Hugo. Sometimes the options are tough to find, unfortunately, but many theme designers provide at least a plug-in option. Others may require you to dig into some of your theme’s partial layouts (i.e., themes/theme_name/layouts/partials/) and learn to read them. Here are some examples:

  • Plug-in CSS: Hugo Tranquil Peak theme tells you to place the file inside your static/ folder then provide the path and filename in the config.toml file:

    [params]
      # Custom CSS. Put here your custom CSS files. They are loaded after the theme CSS;
      # they have to be referred from static root. Example
      # [[params.customCSS]]
      #   href = "css/mystyle.css"         <- AHA!
    
  • Go Fish: Hugo I Am Sam theme doesn’t give you this in the config.toml file, but looking at one of the layout partials you can see that the theme is actually built to plug-in your custom CSS:

    <!-- Custom css -->
    {{ range .Site.Params.customCSS -}}    <- AHA!
    {{ $style := resources.Get . }}
    <link rel="stylesheet" href="{{ $style.RelPermalink }}" integrity="{{ $style.Data.Integrity }}" crossorigin="anonymous" media="screen">
    {{- end }}
    

You want to: renovate the layout of content on your site

You need to know this much more Hugo: You need to learn to use Hugo variables.

I say renovate, but these can be anywhere from small to big renovation projects. The key word here is renovate, which in Hugo world, means you want to override your site’s theme. Let’s say you want different information to show up in your site’s footer. Or maybe you want add something new to the metadata for your blog posts.

Here is a great blog post to get you started:

tl;dr: If you adapt your existing theme’s Hugo layout files, be sure to make a copy of the layout you want to edit first and add it to your project root’s layouts/ folder before editing. Please do not edit any files anywhere in your themes/ folder.

Now, the hardest part of doing is often figuring out which layout file is the one you need to edit. Often you’ll need to do some digging to figure out which file is the one to touch.

.
├── layouts/
│   ├── _default/           # edit me!
│   ├── authors/            # edit me!
│   └── partials/           # edit me!
├── themes/
│   ├── theme_name/
│   │   ├── layouts
│   │   │   ├── _default/   # do not touch
│   │   │   ├── authors/    # do not touch (seriously)
│   │   │   └── partials/   # `r emo::ji("fire")`

You’ll also want to learn about Hugo variables, especially:

You also might need to understand Hugo logic like:

Important: I learned this the hard way, but you cannot wrap your Hugo code in HTML comments to deactivate it; all Hugo code even inside of HTML comments will still be evaluated when you build your site.

You want to: create your own Hugo theme

You need to know this much more Hugo: Welcome to the wizarding world of Hugo! r emo::ji("wizard") You now need to learn to write Hugo templates.

Here are some resources for writing Hugo templates:

These resources were especially helpful to me:

I spent a lot of time looking at other Hugo themes; here are some quality ones to learn from:


Again, this is all just based on my own experiences- your mileage may vary as always.

Alison Hill
Alison Hill
Data Scientist & Professional Educator

I’m a developmental psychologist, former NIH Principal Investigator, and autism researcher who loves programming.